ULTRA Industrial Wireless Dry Contact Sensor (900 MHz)

E2E's ULTRA industrial wireless dry contact sensors can be used to detect contact between two wired contact points. This sensor can be used with an external mechanical switch or a contact plate to alert the user via SMS text and/or email when the contacts touch or a switch is triggered.

ULTRA - Leading Enterprise Grade "Internet of Things" Solutions

ULTRA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,200+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ULTRA sensors to have better interference immunity from other wireless devices.

Superior power management provides ULTRA sensors with almost twice the battery life of E2E’s standard wireless sensors.

• Coin cell sensors typically last 3+ years.
• AA and Industrial sensors typically last up to 12+ years.

ULTRA products employ E2E's Encrypted RF Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again.

Integrated on-board data storage allows ULTRA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.

Over-the-air updates allow ULTRA products to be updated remotely if new fixes or features become available.

E2E ULTRA Industrial Sensors come in an IP65, NEMA 4X, CE rated, sealed, and weatherproof enclosure. They are powered by a single, replaceable, Industrial grade 3.6 V battery (included).

An optional solar powered version is also available. The solar powered version includes a Lithium Iron Phosphate rechargeable battery in conjunction with a solar power cell to keep the battery charged and at optimal capacity. If there is no light present at the solar cell, the battery alone could continue to power the sensor for up to 8-10 years.

Notes:  WARNING: Use caution when interfacing to E2E and ULTRA Dry Contact Sensors. Any external AC or DC Voltages WILL DAMAGE the electronics of the wireless sensor. E2E is not responsible for troubleshooting, replacing or reimbursing damages incurred by disregarding this warning.

Product Features

What does this wireless sensor's data look like in software?

Dry Contact Specifications
Lead Wire Length	1 ft. ( 12 in.)
Detection Wires	High Impedance
Weight	3.7 oz.
Variation Specifications
Security	Encrypted RF (256-bit key exchange and AES-128 CTR)
ULTRA Industrial Specifications
Supply Voltage	2.0 - 3.8 VDC
Battery Type	Replaceable 3.6V, 1800mAH (single AA sized)
Battery Life	Up to 10 Year Battery Life.**
Max Operating Temperature	-40° to 85°C (-40° to 185°F)
Optimal Battery Operating Temperature	+10°C to +50°C (+50°F to +122°F)
Solar Power Option	3.0 VDC Solar Panel 600 mAH Rechargeable Battery (>2000 Charge Cycles - 80% of Initial Capacity) Charging Temperature Range: 0° to 45°C (32° to 113°F) Max Temperature Range: -20° to 60°C (-4° to 140°F)
Enclosure Material	IP65, NEMA 4X, CE rated, sealed, weatherproof enclosure
UL Rating	UL Listed to UL508-4x specifications (File E194432)
Dimension	3.7 in x 2.32 in x 1.38 in
ULTRA 900 MHz Specifications
Operating Frequency	900 MHz Operating Frequency
Certifications	Complies with Part 15 of the FCC Rules. Complies with Industry Canada standards.
Device Range	Device Range Up to 1,200 ft. non-line-of-sight, wireless device range*
Security	Encrypt-RF® (Diffie-Hellman Key Exchange + AES-128 CBC)

What's in the box?

• Wireless Sensor
• Mounting Hardware
• 3V Industrial Battery (Pre-Installed)
• SMA Antenna